Central Technologies
CTParts
blanksearch our site
blankProducts
blankWhats newblank
blankSamples and QuotesSamples and Quotes
BlankResourcesBlank
Engineering Kitsblank
                                                                                                                                                                                    
blankContact
blankAbout
blankMy Cartblank
blankMy Infoblank
blankF.A.Qsblank
blankHome Pageblank
blank
blank

CTDD3120DF-D1.5K-3 Series
4:1 Wide Input Isolated & Regulated
3W Output, Dual Output

  CTDD3120DF-D1R5K-3 Lead Free Bug
View/Print Spec in PDF Format   View/Physical Dimensions
 
Features
 
Efficiency: To 78%.
Temperature Range: -40°C to +85°C.
Isolation: 1.5KVDC.
Package: UL94-V0.
Miscellaneous: Wide (4:1) Input Range. Dual Output. No heat sink required. Short Circuit Protection. Custom service available.
Samples available.
 
Characteristics
 
Output Short Circuit Protection: Continuous Automatic Recovery.
Temperature Rise at Full Load: 15°C (Typ.)
Cooling: Free air convection.
No Load, Power Consumpton: 200mW (typical).
Operating Temperature Range: -40°C to +85°C.
Storage Temperature Range: -55°C to +125°C.
Lead Temperature: 300°C (1.5mm from case for 10 seconds).
Storage Humidity Range: ≤95%.
Case Material: Plastic (UL94-V0).
MTBF: >1,000,000 hours.
Miscellaneous: RoHS Compliant.
 
Specifications
 
Part Number Vin
Nom.
(VDC)
Input Range
(VDC)
Vin
Max*
(VDC)
Vout
(VDC)
Iout
Max.
(mA)
Iout
Min.
(mA)
Effi.
Typ.
(%)
Request
Samples
& Quotes
CTDD3120DF-2405-D1.5K-3 24 9-36 40 ±5 ±300 ±30 72 blankRequest
CTDD3120DF-2412-D1.5K-3 24 9-36 40 ±12 ±125 ±12 78 blankRequest
CTDD3120DF-2415-D1.5K-3 24 9-36 40 ±15 ±100 ±10 76 blankRequest
CTDD3120DF-4805-D1.5K-3 48 18-72 80 ±5 ±300 ±30 72 blankRequest
CTDD3120DF-4812-D1.5K-3 48 18-72 80 ±12 ±125 ±12 78 blankRequest
CTDD3120DF-4815-D1.5K-3 48 18-72 80 ±15 ±100 ±10 76 blankRequest
*If input voltage above specified may cause permanent damage to the device
 
Isolation Specifications
Item Test Condition Min Typ Max Units
Isolation Voltage Flash tested for 1 minute 1500 - - VDC
Isolation Resistance Test at 500VDC 1000 - - MW
 
Output Specifications
Item Test Condition Min Typ Max Units
3W Output Power - 0.3 - 3 W
Voltage accuracy Refer to Recommended Circuit - ±1 ±3 %
Load Regulation From 10% to 100% full load - ±0.5 ±1 %
Line Regulation Input Voltage from low to high - ±0.2 ±0.5 %
Temperature Drift (Vout) Refer to Temp. Derating Graph - - ±0.03 %/°C
Ripple 20MHz Bandwidth - - 50 mVp-p
Noise 20MHz Bandwidth - 50 150 mVp-p
Switching Frequency 100% load, nominal input voltage 300 (PFM) KHz
Note: All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output unless otherwise specified.
Last Revised 08.13.07